ATAR Notes: Forum
Archived Discussion => 2010 => End-of-year exams => Exam Discussion => Victoria => Physics => Topic started by: gamblor0 on November 10, 2010, 03:03:35 pm
-
im certain its A, cause the question mentioned something along the lines of they have the same loudness of something like that, which means the amp was the same??
thoughts?
-
I dont know anymore =D these arguments for B are quite convincing, so we can only really confirm if we have a copy of the paper.
-
yes same loudness.... but the microphone characteristics showed that it was more sensitive around 3000 Hz. Which means that the energy of the output signal was greater... so B!
-
to clarify *i have the paper*
-
But the flat-response was at 0DB!
-
if it explicitly states that q9 is part of q10 then i reckon it has to be B..
-
if its B then my hopes of 90/90 are quashed :(
pleeeeeeeeeease be A!!!!!!!!!!
-
if its B then my hopes of 90/90 are quashed :(
pleeeeeeeeeease be A!!!!!!!!!!
xD I'm in the same position but I don't really care that much if it turns otu to be B, its onyl 2 marks.
-
if it explicitly states that q9 is part of q10 then i reckon it has to be B..
Exactly, so it should be A no. . ? there is better/louder reproduction for 2000-10000 begin_of_the_skype_highlighting 2000-10000 end_of_the_skype_highlighting
-
if its B then my hopes of 90/90 are quashed :(
pleeeeeeeeeease be A!!!!!!!!!!
lol same
-
Ahhhh....synchrotron was a breeze :P
-
its B
2 of our teachers did the paper right after exam, and they both got B
and theyre good teachers
-
are we sure?
-
pretty sure 10 is B
+1
yeah i think it should be B, it said they were the same intensity, but u had to refer the the graph, and the microphone was more sensitive to the higher frequency sound, so its amplitude had to be higher than the other sound.
Mr.Chan hits the point home.
this is what me and other guys wrote on another thread
-
BBBBBBBRRRRRRRRRRRRRRROOOOOOOOOOOOOOOOOOOOOOo
It's B
It goes "the sound intensity is exaclty the same when it reaches the microphone"
I initially put A, but then re-read the question, and when i saw microphone, i'm like "WHAT MICROPHONE WHAT THE HELL ARE YOU TALKING ABO-... OHHHHHHHH this is a continuation of question 9"
Cos it goes "please refer to the following graph for questions 9 and 10"
SOOOO the output for the 3khz sound would be higher as read by the CRO which is attached to the mic because the mic is more sensitive to the sound at 3khz compared to the 1khz.
SO LOCK IN B EDDIE
-
BBBBBBBRRRRRRRRRRRRRRROOOOOOOOOOOOOOOOOOOOOOo
It's B
It goes "the sound intensity is exaclty the same when it reaches the microphone"
I initially put A, but then re-read the question, and when i saw microphone, i'm like "WHAT MICROPHONE WHAT THE HELL ARE YOU TALKING ABO-... OHHHHHHHH this is a continuation of question 9"
Cos it goes "please refer to the following graph for questions 9 and 10"
SOOOO the output for the 3khz sound would be higher as read by the CRO which is attached to the mic because the mic is more sensitive to the sound at 3khz compared to the 1khz.
SO LOCK IN B EDDIE
B is locked in.
-
BBBBBBBRRRRRRRRRRRRRRROOOOOOOOOOOOOOOOOOOOOOo
It's B
It goes "the sound intensity is exaclty the same when it reaches the microphone"
I initially put A, but then re-read the question, and when i saw microphone, i'm like "WHAT MICROPHONE WHAT THE HELL ARE YOU TALKING ABO-... OHHHHHHHH this is a continuation of question 9"
Cos it goes "please refer to the following graph for questions 9 and 10"
SOOOO the output for the 3khz sound would be higher as read by the CRO which is attached to the mic because the mic is more sensitive to the sound at 3khz compared to the 1khz.
SO LOCK IN B EDDIE
LOL I can just imagine that going through your head as you calmly select A then go "WHAT MICROPHONE? WTF? F**K YOU SMOKING BRAH?!"
LMAOO I went through the same experience :P