ATAR Notes: Forum
VCE Stuff => VCE Science => VCE Mathematics/Science/Technology => VCE Subjects + Help => VCE Chemistry => Topic started by: destain on June 12, 2012, 12:35:47 am
-
An ore sample (nickel content to be determined) was prepared for analysis by
digestion of 1.35g of ore in acid and made up to 10ml.
This solution was then diluted with distilled water to 100ml.
Conc. of nickel ions in mg/L in the diluted sample is 1.24 x 10^-3 mg/L
1) Determine the mass of nickel, in mg, in the ore sample.
-Either im fried or the answers are wrong OR i missed something
-
An ore sample (nickel content to be determined) was prepared for analysis by
digestion of 1.35g of ore in acid and made up to 10ml.
This solution was then diluted with distilled water to 100ml.
Conc. of nickel ions in mg/L in the diluted sample is 1.24 x 10^-3 mg/L
1) Determine the mass of nickel, in mg, in the ore sample.
-Either im fried or the answers are wrong OR i missed something
1.24E-4 mg?
You sure its 1.24E-3 mg/L or 1.24E-3 g/L?
-
WOWOWOWOWOW THATS WHERE IM WRONG, ITS 10^3 NOT -3
WTF WOW IM PUTTINGA NEGATIVE IN FRONT OF EVERYTHING o
NO WONDER THE CALIBRATION GRAPH I DREW WAS SO WEIRD WTFFFFFFFFFF
thank you :)