Login

Welcome, Guest. Please login or register.

October 10, 2025, 08:17:23 am

Author Topic: How was it?  (Read 35346 times)  Share 

0 Members and 3 Guests are viewing this topic.

fdsfsgdfgdf

  • Victorian
  • Forum Regular
  • **
  • Posts: 79
Re: How was it?
« Reply #30 on: June 08, 2010, 02:14:30 pm »
yeah just derived that bad boy.

apart from the spring q on motion though. i think i went alright. Only other concern are explain questions in electronics. they always confuse the hell out of me.

structures was the easiest i have ever seen lol. no angles or anything lol
yeah none of that difficult torque questions (i dont get torque still :()

kenhung123

  • Victorian
  • ATAR Notes Legend
  • *******
  • Posts: 3373
Re: How was it?
« Reply #31 on: June 08, 2010, 02:16:10 pm »
The explain questions for photonics when darker is increase and then increase yea? Coz less light=more resistance=more Vout

When you want the light to go on earlier LDR would increase causing Vout to increase so R must increase to reduce the influence of LDR increase?

bomb

  • Victorian
  • Forum Leader
  • ****
  • Posts: 688
Re: How was it?
« Reply #32 on: June 08, 2010, 02:16:43 pm »
Yup, got 5.7degrees and 4J, and 50Nm-1 for spring constant
“Great minds have purposes; little minds have wishes. Little minds are subdued by misfortunes; great minds rise above them.” Washington Irving

2010 Results
ATAR: 96.05

jeff213

  • Victorian
  • Fresh Poster
  • *
  • Posts: 2
Re: How was it?
« Reply #33 on: June 08, 2010, 02:17:06 pm »
What do you think the A+ cut off will be for this exam? Lower than last year's 96?

kenhung123

  • Victorian
  • ATAR Notes Legend
  • *******
  • Posts: 3373
Re: How was it?
« Reply #34 on: June 08, 2010, 02:17:17 pm »
ABB

third w was about momentum.. trickkkyy asssss
third was if the collision was inelastic so energy is lost..

fdsfsgdfgdf

  • Victorian
  • Forum Regular
  • **
  • Posts: 79
Re: How was it?
« Reply #35 on: June 08, 2010, 02:17:37 pm »
The explain questions for photonics when darker is increase and then increase yea? Coz less light=more resistance=more Vout

When you want the light to go on earlier LDR would increase causing Vout to increase so R must increase to reduce the influence of LDR increase?
i agree with the first ,

but the second one doesnt the light increase since it is at sun set so early would be after noon eg.

kenhung123

  • Victorian
  • ATAR Notes Legend
  • *******
  • Posts: 3373
Re: How was it?
« Reply #36 on: June 08, 2010, 02:17:46 pm »
What do you think the A+ cut off will be for this exam? Lower than last year's 96?
Hopefully...........

dirty_commie

  • Victorian
  • Adventurer
  • *
  • Posts: 17
Re: How was it?
« Reply #37 on: June 08, 2010, 02:18:33 pm »
What do you think the A+ cut off will be for this exam? Lower than last year's 96?

Without a doubt, lower.

Greggler

  • Guest
Re: How was it?
« Reply #38 on: June 08, 2010, 02:19:53 pm »
ABB

third w was about momentum.. trickkkyy asssss
third was if the collision was inelastic so energy is lost..

however it was asking about momentum. i thought too that it was asking about the total energy or kinetic energy or something. but it was about momentum. which is conserved despite being inelastic or elastic

sasha

  • Victorian
  • Adventurer
  • *
  • Posts: 19
Re: How was it?
« Reply #39 on: June 08, 2010, 02:19:59 pm »
well i did the vcaa 2009 exam in 30min and got 84/90 <--no double checking :(
this year's exam was alot harder, but still possible :D hoping cut of mark would be around 75ish

kyzoo

  • Victorian
  • ATAR Notes Superstar
  • ******
  • Posts: 2040
Re: How was it?
« Reply #40 on: June 08, 2010, 02:21:51 pm »
I got ABB for the graphs question

and LOL my calculator was in radians moed so i got 6.3 degrees for the banked curve one even though I had the correct working out

And I am really really confused about the 0J vs 4J question. I got 4J, but physics teacher says 0J =/ Such a confusing question =/

And haha I was going really slow at first...I saw i was at question 8 for motion when 30 minutes already passed >.< So I quickened up and finished with 20 mins to go lol...then i spent the last 20 minutes checking motions questions i had asterixed (there weren't really any contentious question in electricity or strctures)
2009
~ Methods (Non-CAS) [48 --> 49.4]

2010
~ Spesh [50 --> 51.6]
~ Physics [50 --> 50]
~ Chem [43 --> 46.5]
~ English [46 --> 46.2]
~ UMEP Maths [5.0]

2010 ATAR: 99.90
Aggregate 206.8

NOTE: PLEASE CONTACT ME ON EMAIL - [email protected] if you are looking for a swift reply.

kenhung123

  • Victorian
  • ATAR Notes Legend
  • *******
  • Posts: 3373
Re: How was it?
« Reply #41 on: June 08, 2010, 02:23:37 pm »
I got ABB for the graphs question

and LOL my calculator was in radians moed so i got 6.3 degrees for the banked curve one even though I had the correct working out

And I am really really confused about the 0J vs 4J question. I got 4J, but physics teacher says 0J =/ Such a confusing question =/

And haha I was going really slow at first...I saw i was at question 8 for motion when 30 minutes already passed >.< So I quickened up and finished with 20 mins to go lol...then i spent the last 20 minutes checking motions questions i had asterixed (there weren't really any contentious question in electricity or strctures)
Is it 0J!!! Damn!!!!!!!!!!! I don't get why the graph is B for last one?

tkjnz

  • Guest
Re: How was it?
« Reply #42 on: June 08, 2010, 02:23:53 pm »
what did you guys get for the spring question, with the total energy lost

I got 4J, it should have been 0 I think, but I couldnt show the working out to prove it.

i got 4J too, i was going to go back to recheck it but ran out of time

Greggler

  • Guest
Re: How was it?
« Reply #43 on: June 08, 2010, 02:24:10 pm »
yeah me too. motion took me like 40 minutes. then took me 20 minutes to do the rest lol and spent 25 minutes pretty much redoing motion.
spring q was a bit of a lolwut moment.

what about the projectile one./ did everyone get around 63m the 63m/s or something like that. i wasnt too sure about that one

sasha

  • Victorian
  • Adventurer
  • *
  • Posts: 19
Re: How was it?
« Reply #44 on: June 08, 2010, 02:24:15 pm »
i did C for the last graph, inelastic > V drops, energy goes into heat/sound etc