Login

Welcome, Guest. Please login or register.

July 10, 2025, 03:20:10 pm

Author Topic: Q) Alloys  (Read 733 times)  Share 

0 Members and 1 Guest are viewing this topic.

WhoTookMyUsername

  • Guest
Q) Alloys
« on: April 10, 2011, 04:35:09 pm »
0
Unit 1 Question:
Alloys are generally less malleable than pure metals,
does this mean they are more brittle?

Danke

iNerd

  • Guest
Re: Q) Alloys
« Reply #1 on: April 10, 2011, 04:47:21 pm »
0
Harder but more brittle I think...

scocliffe09

  • Victorian
  • Forum Obsessive
  • ***
  • Posts: 310
  • Respect: +46
Re: Q) Alloys
« Reply #2 on: April 10, 2011, 04:54:42 pm »
0
Harder but more brittle I think...
Yep - usually hard but brittle :)
Just back from spending the year at Oxford. Now onto final year Monash MBBS.

2009: Biology [50], Maths Methods (CAS) [45]
2010: English [50], German [50], Chemistry [50] Monash Uni Chem [5.5]
ATAR: 99.95.

HERculina

  • Victorian
  • Part of the furniture
  • *****
  • Posts: 1209
  • To ∞ and beyond
  • Respect: +11
  • School: St. Trinians
  • School Grad Year: 2012
Re: Q) Alloys
« Reply #3 on: April 10, 2011, 05:02:56 pm »
0
Why can the alloy solder be used to join metals together?
------------------------------------------------------> :D <-----------------------------------------------------

scocliffe09

  • Victorian
  • Forum Obsessive
  • ***
  • Posts: 310
  • Respect: +46
Re: Q) Alloys
« Reply #4 on: April 10, 2011, 05:11:38 pm »
0
Why can the alloy solder be used to join metals together?

I'm pretty sure we use it because it has a relatively low melting point but is a good conductor of electricity.
Just back from spending the year at Oxford. Now onto final year Monash MBBS.

2009: Biology [50], Maths Methods (CAS) [45]
2010: English [50], German [50], Chemistry [50] Monash Uni Chem [5.5]
ATAR: 99.95.

HERculina

  • Victorian
  • Part of the furniture
  • *****
  • Posts: 1209
  • To ∞ and beyond
  • Respect: +11
  • School: St. Trinians
  • School Grad Year: 2012
Re: Q) Alloys
« Reply #5 on: April 10, 2011, 05:20:42 pm »
0
oo but if it has a low melting point does it mean that its more softer --> malleable?
------------------------------------------------------> :D <-----------------------------------------------------

schnappy

  • Victorian
  • Forum Leader
  • ****
  • Posts: 569
  • Respect: +7
Re: Q) Alloys
« Reply #6 on: April 10, 2011, 09:57:24 pm »
0
Yeah solder is very malleable, and low melting point. That doesn't make it better for joining things it's just easiest... commercian 40/60 electronics solder has a flux core which allows the alloy to adhere to what its meant to as well, where as without flux it just clumps to itself.